-40%

Crimping Tool up to AWG4/0 - German made - great

$ 263.47

Availability: 97 in stock
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • Item must be returned within: 14 Days
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No

    Description

    Crimping tool
    Operated only by your hands force
    No power plug nearby needed
    No battery to charge
    No oil that can be spilled
    No temperature problems - arctic prooven
    No need to have another tool
    It will even work under water ;-)
    (you will afterwards have to dry the tool thouroughly and oil with e.g. WD40 for rust protection)
    Mechanical hand crimper MP150 / MTR 110 / MP1 / MPZ 55
    Smooth operating and handy all-purpose tool. Crimping depth is reached repeatedly by circulating-cam. International introduced.
    Reliably crimps various domestic and international terminals and connectors. A wide range of inserts is available. Special profiles are available on request.
    Crimp force: 55 kN
    Application range:
    Maximum cross section
    DIN 46235: 150mm ² hexagonal
    AWG up to 4/0
    color coded lugs up to 4/0 (prooven AMP-crimp, composed of an indentor and a nest die - ask for photos)
    also hexagon crimp inserts up to AWG 4/0 availlable
    Uses commonly availlable dies with 30 x 30 x 12 mm (1.18 x 1.18 x 0.47in)  outer dimensions! (Look for dies for Izumi hydraulic tools)
    Function principle: The moveable handle is unlocked by turning the locking device to operating position. With the rapid advance handle you can rotate the tools lower die holder to the lowest position. Open the head, insert desired diesand close the head completely. Now you can insert the lug and turn the advance handle untill the lug is held securely. Now insert the cable and begin to crimp by operating the moveable handle. This is the key - the handle itself has a beared ratchet which is eccentrically stored. This ratchet accumulates the force by turning a cogwheel which also has an eccentrically stored rod on it. You get a multiplication of force. Hence low handle forces of only up to 30 lb and crimp forces availlable only in much more expensive hydraulic crimpers.
    But this tool is even better than hydraulic tools as it is usable everywhere you like. There is no hydraulic oil involved. If falling into the sand just thoroughly clean it. Try this with a hydraulic tool - you will end up with leaking seals. Go to areas with low temperatures - you will have to warm hydraulic tools as the oil will be too thick to work. Go to deserts orr other high temp areas and you get the opsite. You can not be sure that the crimp is good, as pressures may not have been reached. With this mechanical tool you have non of these problems.
    Weight: 2.4 Kg / 5 lb
    Weidmuller Item no. 9018020000
    Matching dies can be foung in other auctions - or just ask me. Take also note of inexpensive die-sets. If you have special needs concerning dies please ask. I have many die types or can even build speciality dies at reasonable cost.
    Thanks for looking!
    MTR110, MTR-110, MPZ55, MPZ-55, T2600, T-2600, isolec-ii, izumi, 30x30
    allauctionsgallery070709
    eBay Software und Tools für Auktionsvorlagen brought to you by www.e-sells.de