NEW MFD800C Ultrasonic Flaw Detector multi-color TFT LCD Up to 9999 mm in Steel

Description

NEW MFD800C Ultrasonic Flaw Detector Multi-color TFT LCD Up to 9999 mm in Steel
The MFD800C is an advanced digital ultrasonic flaw detector
featuring a multi-color TFT LCD and a host of new features to meet challenging
inspection requirements. It combines powerful flaw detection and measurement
capabilities, extensive data storage, and the ability to transfer detailed
inspection data to the PC via its high-speed USB port.
The instrument incorporates many advanced signal processing
features including a 15MHz RF bandwidth to permit testing of thin materials,
narrowband filters to improve signal to noise in high gain applications, a spike
pulser for applications requiring higher frequencies, and a tunable square wave
pulser to optimize penetration on thick or highly attenuating
materials.
The instrument can be widely used in locating and sizing
hidden cracks, voids, disbands, and similar discontinuities in welds, forgings,
billets, axles, shafts, tanks and pressure vessels, turbines, and structural
components.
RANGE
Up to 9999 mm in steel; range selectable in fixed steps or
continuously variable.
Pulser
Pulse Energy selectable among 200V, 300V, 400V, 500V and
600V..
Pulse Width tunable from 0.1µs to 0.5 µs to match the probes
with different frequency.
Pulse Repetition Frequency adjustable from 10 Hz to 1 KHz in
1 Hz increments.
Damping selectable among 68Ω,100Ω,150Ω and 500Ω for optimum
probe performance
Test Modes include Pulse echo, dual and
thru-transmission
Memory
Memory of 1000 channel files to store calibration
set-ups
Memory of 10000 wave files to store A-Scan patterns and
instrument settings.
Video
Recorder
Screen scenes can be captured as movie files. More than 10
hours movie can be saved to the inside memory. They can be re-played using the
instrument or the PC software delivered with the instrument.
Video Recorder is useful in many situations, it is very
convenient for those who want to analyze the probing activities later.
FUNCTIONS
Semiautomatic two point calibration: Automated calibration
of transducer zero offset and/or material velocity
Flaw Locating:Live display Sound-path, Projection (surface
distance), Depth, Amplitude,
Flaw sizing: Automatic flaw sizing using AVG/AVG or DAC,
speeds reporting of defect acceptance or rejection.
Digital Readout and Trig. Function: Thickness/Depth can be
displayed in digital readout when using a normal probe and Peam path, Surface
Distance and Depth are directly displayed when angle probe is in use.
Both the DAC and the AVG method of amplitude evaluation are
available.
AWS D1.1.
Curved Surface Correction feature
Crack Height Measure function
Weld figure feature
Magnify gate:spreading of the gate range over the entire
screen width
Video Recording and play
Auto-gain function
Envelope: Simultaneous display of live A-scan at 60 Hz
update rate and envelope of A-scan display
Peak Hold: Compare frozen peak waveforms to live A-Scans to
easily interpret test results.
A Scan Freeze:Display freeze holds waveform and sound path
data
B Scan display feature
COMMUNICATION
High speed USB2.0 port. Two USB modes can be selected:
U-DISK and U-BRIDGE. In U-DISK mode, the instrument acts as a usb flash disk
when connected to pc. Configuration files, saved pictures and recorded movies
can be copied to pc when possible. In U-BRIDGE mode, the instrument exchanges
data with DataPro Software. The optional DataPro software helps manage and
format stored inspection data for high-speed transfer to the PC. Data can be
printed or easily copied and pasted into word processing files and spreadsheets
for further reporting needs. New features include live screen capture mode and
database tracking.
SPECIFICATIONS
l Range: 0 to 9999 mm, at steel velocity
l Material Velocity: 1000 to 9999m/s
l Display Delay: -20 to 3400 µs
l Probe Delay/Zero Offset : 0 to 99.99µs
l Sensitivity: 110 dB max in selectable resolution 0.1, 1.0,
2.0, 6.0 dB and locked.
l Test Modes: Pulse echo, dual element and
thru-transmission
l Pulser: Tunable Square Wave Pulser
l Pulse Repetition Frequency ranges from 10 Hz to 1000
Hz
l Pulse Energy: 200V, 300V, 400V, 500V, 600V
selectable
l Bandwidth (amplifier bandpass ): 0.5 to 15 MHz
l Gate Monitors: Two independent gates controllable over
entire sweep range
l Rectification: Positive half wave, negative half wave,
full wave, RF
l System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25%
FSH, Amplifier Accuracy +/-1 dB.
l Reject (suppression): 0 to 80% full screen
height
l Units: Inch or millimeter
l Transducer Connections: BNC or LEMO
l Power Requirements: AC Mains 100-240 VAC, 50-60
Hz
l Operating Temperature: -10°C to 50°C
l Storage Temperature: -30°C to 50°C
Standard
Configuration
No.
Item
Qty.
1
Portable Ultrasonic Flaw Detector with
multi-color TFT LCD Display
1
2
Straight Beam Transducer (4 MHz,
Φ10)
1
3
Angle Beam Transducer (4 MHz, 8 mm×9 mm,
60°)
1
4
Interconnect Cable for the transducer (Q9-C5,or
optional C9- C5)
1
5
Rechargeable Li-Ion Battery Package, 8.8 amp
hour
1
6
Power supply/charger unit
1
7
Handle
1
8
Operating Manual in English
1
9
Datapro Software
1
10
USB Cable (Model: MUSB01)
1
Payment Term:
1.We can accept Credit Cards,Paypal,T/T,Escrow and so on.
2.The buyer is responsible for any tax and/or duty charged by their country.
International Shipping:
The package will be shipped by DHL, FEDEX or EMS.
After we shipped the parcel,we'll fill in the tracking number and inform you by e-mail.
Please write the correct address and telephone number when you make orders,
so the courier can contact you when they deliver the parcel to you. thanks
Warranty Term:
1.All the products have been checked and packed in good condition before dispatch.
2.All the products with one year warranty.
3.If you find any quality problems,please send it back within 3 days,
and we'll send you a new one or refund you the payment after we get the returned one.
4.Buyers have to pay for the return cost and we will pay the cost for resend
5.All products returned should be in new conditions.
Feedback:
1.A good feedback is very important for our store,if you feel satisfied with our products,please give us  positive feedbacks.
2.Please contact us before leaving any negative or neutral feedback,We will work with you to solve any problems